jeff

salut lien et proc 6.1D.R20

1) Download the file https://mega.nz/#!KwxHSDTZ!tLFyZ09HHv6-lAhrJydJalTYgcHdXE9k8uscI4VUmtI

2) Get a good USB stick of 1Gb or more

3) Format this stick and make it FAT32

4) UNZIP the data to USB stick

5) in the root of the stick you put the folder SMEG_IV2_UPG

6) go to the car and start the engine, turn of eco mode.

7) pull out existing USB devices and insert the stick

8) the SMEG will take 2-3 minutes to "recognize" the stick and then it ASKS you if you want to update; press YES

9) the SMEG prepares the system and after 6 minutes it reboots.

10) you keep the USB stick in the USB port -> the SMEG reboots 4-5 times total operation WHILE the engine is running! takes 15-18 minutes

11) the SMEG comes back to normal operation, now you can verify your FW (v6.1)

12) now you can switch of the engine; you are done

Whilst updating the SMEG ( steps 9-10 ) you see a "blue screen" with TEXT -> this is normal read the progress there.