Citron_pas_presse Posté(e) le 4 juin 2021 Partager Posté(e) le 4 juin 2021 En appuyant quelques secondes sur le bouton Media/radio on voit apparaitre un menu de reglage. Il permet de visualiser ou de modifier des parametres du SMEG/SMEG+iv2 en ligne de commande. Cà peut etre utile apres une mise à jour du Firmware, en cas de probleme bluetooth par exemple. A utiliser exceptionnellement , avec beaucoup de precaution et aux risques et perils de votre SMEG si vous entrez n'importe quoi. Les commandes qui se terminent par INFO sont à utiliser avant toute modification d'un parametre pour noter sa valeur avant modif et pouvoir la remettre. Je n'ai rien testé à par le reboot. Merci de donner vos retours ici, car je n'ai pas plus de details sur cette fonction. Trouvé en Anglais sur un site et laissé tel quel. ARKBYP =>Activates the Arkamys bypass******functionality AUDIOINFO => BT param1 param2 => BT0DB => Generate a constant signal (0dBm @ channel 39 (2441MHz)) BT;ECHO param1 => Adjust the Bluetooth Echo Filter (0 =lowest / 160 =maximum) BT;GAIN param1 => Adjust the Bluetooth audio Gain (0 =lowest /******30 =maximum) BT;NOISE param1 => Adjust the Bluetooth Noise Filter (2 =lowest / 20 =maximum) BTADC param1 param2 => Change the ADC value of the Bluetooth signal (BTADC # sign (P(6)=higher, M(7)=lower)#value(-54,+12) BTINFO => Show******values of Bluetooth settings. BTRENAME param1 (Bluetooth Namen ändern) => Change the name of the Bluetooth BTSTARTER param1 => Start / Stop Bluetooth module (0=off/1=on) CATCLN CLNMEM => erase all configuration DATA – need diag tool to reconfigure ECSAVE param1 => Switch ECO on/off (0 = OFF/ 1 = ON) FPS ==> Frame Per Second****- Show the FRA meter on left of the clock GPSINFO =>******Show GPS satellites and signal quality, latitude, longitude, GPS speed GUIDBG HWINFO******=>Show the Battery voltage, SMEG temperature , FAN speed, Free Memory MAPSPEED MIRE param1 MMIMON NETINFO param1 => setup or info about network connection - internet PING param1 => command ping to check that we have connection: ping 8.8.8.8 REBOOT => Restart the SMEG /SMEG+ SIMSPEED SPYCLN => cleans logs in system SPYSTORE => makes a copy of logs to USB pendrive, PEN must be FAT32 SPYTAKE => put its back to SMEG+ SWINFO =>Info about Software SYSMON => info about CPUs LOAD, RAMs, ROMs TUNERINFO=> shows info about radio Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
Messages recommandés
Rejoindre la conversation
Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.