Anti-demarrage code XM V6

Hello i own a XM V6 1990.

Recently, i had a anti-demarrage code problem and the car won't start.

In order to try to solve the problem, the wires of the connector to the anti-demarrage code keyboard, where accidently unplugged from the connector.

I have connected the wires to the connector but when i start the ignition, the red light of the keyboard is always blinking, and i can't introduce the code.

Can anyone tell me the order that the wires are connected to the keyboard conector ?

thank you merci (sorry i can't speak french )

Hello !

I think that help you :

Digital keyboard connector pinout.

1_ +12v (all time)

2_ From doors locking enclosure : signal of opening 0v / 12v / 0v

3_ + 12 v from pin 35 of the calculator when the contact is in the neiman

4_ To pin 22 of the calculator (may be info way?)

5_ 0 v then +12 v position starting on contact, then 0 v

6_ NC

7_ + 12 V after contact to witness diagnostic

8_ From doors locking enclosure: signal opening 0 v / 12 v / 0v

9_ From doors locking enclosure: signal closing 0 v / 12 v / 0 v

10_ From doors locking enclosure (voltages from 5.6 v to 10 V implementation of contact)

11_ From the driver’door closing contact: goes from 0 v to 12 v fixed when closure

12_ NC

13_ + 12 v after contact

14_ + 12 v after contact power supply 1/2 relay dual (side injectors)

15_ 0 v

@+, Bernard !